Staying safe around electricity isn’t optional, it’s a must. A little carelessness can lead to serious injuries or even worse, so following some basic safety rules is non-negotiable. These 10 Safety Precautions when working with electricity, will help keep you protected while working with electricity.
1. Water and Electricity? Hard Pass. Water is a fantastic conductor of electricity, which makes it a nightmare when mixed with live wires. Never, and I mean never, work on any electrical equipment with wet hands. That’s just asking for trouble. Also, keep your workspace dry. Puddles and electricity don’t mix well.
2. Frayed Wires Are Fire Hazards If you spot a cord with frayed edges, damaged insulation, or a broken plug, don’t just shrug it off. That’s a fire waiting to happen. Either replace it or get it professionally repaired before using it again.
3. Shut Off the Power Before You Get Handy Planning to mess with a light switch or an outlet? Flip that breaker switch off first. For extra safety, slap a sign on the panel so no one flips it back on while you’re in the middle of things.
4. Insulated Tools Are Your Best Friend Regular screwdrivers and pliers might get the job done, but insulated tools could save your life. If you’re working on anything electrical, use tools designed to handle high voltage without passing it straight to your hands.
5. Warning Signs Exist for a Reason Exposed wires, energized parts, and unguarded equipment are no joke. If something has a sign that says “Shock Risk,” take it seriously. Electrical codes exist for a reason, and they vary by country, so make sure you know the rules where you live.
6. Protect Your Hands and Eyes If you’re working on a branch circuit or messing with any wiring, wear insulated rubber gloves, safety goggles. You don’t want an unexpected spark flying into your eye or your hands accidentally grounding an electrical current.
7. Always Check If Equipment is Live Never assume something is turned off just because the switch is in the off position. Use a voltage tester to double-check before you start working. Touch the tester to wires, the outer casing of the service panel, and anything else that could still be carrying a charge.
8. Ditch Metal Ladders for Electrical Work If you need a ladder to reach a fixture or an outlet, avoid aluminum or steel ladders at all costs. If you make contact with a live wire, the ladder will ground you, and the entire current will run through your body. Use a fiberglass, bamboo, or wooden ladder instead.
9. Know Your Local Wire Code Not all wiring is the same. Countries have different wire color codes to indicate voltage, neutral, and ground wires. Before you start working, make sure you know what colors mean what in your region.
10. Test Your GFCIs Every Month Ground Fault Circuit Interrupters, or GFCIs, are lifesavers in wet areas like kitchens and bathrooms. They cut off power fast if there’s a short circuit or overcurrent. Press the test button once a month to make sure they’re still doing their job.
See more Electrical Safety Tips here.
Watch our Electrical Safety Videos here for Free
For more safety materials on Electrical Safety, visit our PowerPoints and Infographics dedicated to this focus.
Staying safe around electricity isn’t optional, it’s a must. A little carelessness can lead to serious injuries or worse, so following some basic safety rules is non-negotiable. The guidelines below will help keep you protected while working with electricity, whether at home or on the job.
For workplace electrical safety, the NFPA 70E Standard provides detailed guidelines on preventing electrical hazards like shock, arc flash, and electrocution. Additionally, OSHA’s Electrical Safety Standards outline specific workplace requirements for minimizing electrical risks. If you’re working with powered equipment, it’s also essential to understand OSHA’s Lockout/Tagout Standard to prevent accidental power surges during maintenance.
By following these safety measures and staying informed about electrical hazards, you can significantly reduce the risk of injuries and ensure a safer work environment.
